Canon IR 2420 Easy Operation Manual

Also see for imageRUNNER 2420: Copying guide Reference guide Trouble error codes list Network guide Remote guide

Contents

35Other Useful FunctionsPrefaceOther UsefulFunctionsCopyingFunctionPrintingFunctionUsefulFunctions andSettings36Start ScanningSpecify the scan settings that suit yourpreferences, and click [Scan].On the Color Network ScanGear Main Window, specifythe settings such as the Color Mode, Resolution, etc.Click [Scan] to acquire the image.When scanning is complete, remove your originals.For more information, see the Network ScanGear Guide.Scanning from a Computer (Remote Scan)The following is the basic procedure for remotely scanning originals and loading the scan to a computer. For more information, see thereferences to other guides.Open the Color Network ScanGear Main WindowOpen a TWAIN-compliant application on yourcomputer desktop, and start the scanningoperation.Make sure that the Color Network ScanGear is selectedas the scanner to be used.Select the command to start scanning operation (suchas [Scan New] or [Acquire]).The Color Network ScanGear Main Window appears.For more information, see the documentation thatcomes with your TWAIN-compliant application.Place Your OriginalsPlace in the feederPlace on the platen glassPlace your originals.Close the feeder/platen cover after placing youroriginals on the platen glass.To set the scan settings such as data compression orgamma values, press (Additional Functions) andselect or Gamma>.For more information, see Chapter 3, “Useful Functionsand Settings,” in the Reference Guide.PrepareReady to scan.(Online)ScanScan Standby DisplayPress to switch to the Scan mode.If the machine is in the Sleep mode, press (Power).If the message appears, enterthe Department ID and password.Dept. ID/Pass InputPassword:*******ID Key after InputWhen done press ID keyDept. ID:0000001If the message appears, enter theUser ID and password.ID Key after InputWhen done press ID keyUser ID:User01Password:******Enter User ID/PassFor more information, see Chapter 2, “BasicOperations,” in the Reference Guide.To cancel remote scanningScanning from a Computer (Remote Scan)Press (Stop) use or to select press [OK].Yes NoCancel?* The screen shots shown below may differ from the ones displayed on your computer, depending on the machine and optional equipment, version of ColorNetwork ScanGear, or operating system you are using.* If you want to use the machine as a network scanner, it must be connected to a computer over an IPv4 network.* The Color Network ScanGear driver is compatible only with the Windows operating systems.* The Remote Scan function is available only if the optional Network Kit is attached.

/ 21

Related manuals for Canon imageRUNNER 2420