Using an Eye-Fi Card176You can check the Eye-Fi card’s access point SSID, or connection status.Choose [Connection info].z Press the n button to choose [Eye-FiSettings] in the 3 tab, then press the mbutton.z Press the op buttons to choose[Connection info], then press the mbutton.X The connection info screen will appear.You can set the card to disable Eye-Fi transfer.Choose [Disable] in [Eye-Fi trans.].z Press the n button to choose [Eye-FiSettings] in the 3 tab, then press the mbutton.z Press the op buttons to choose [Eye-Fitrans.], then press the qr buttons tochoose [Disable].Checking Connection InformationDisabling Eye-Fi TransferWhat if [Eye-Fi Settings] does not appear?[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in thecamera, and when an Eye-Fi card’s write-protect tab is in the locked position. Forthis reason, settings cannot be changed for Eye-Fi cards equipped with a write-protect tab when the tab is in the locked position.
