177If you think there is a problem with the camera, first check the following. If theitems below do not solve your problem, contact a Canon Customer SupportHelp Desk.PowerYou pressed the ON/OFF button, but nothing happened.• Confirm that the battery is the correct type, and is not depleted (p. 15).• Confirm that the battery is properly inserted (p. 17).• Confirm that the memory card/battery cover is securely closed (p. 18).• If the battery terminals are dirty, battery performance will decrease. Clean the terminalswith a cotton swab and re-insert the battery several times.Battery is consumed quickly.• Battery performance decreases at low temperatures. Warm the battery, for example, byplacing it in your pocket with the terminal cover on.Lens will not retract.• Do not open the memory card/battery cover while the power is on. After closing thememory card/battery cover, turn the power on then back off (p. 18).TV outputImage is distorted or not showing on TV (p. 170).ShootingCannot shoot.• When in Playback mode (p. 22), press the shutter button halfway (p. 25).Screen does not display properly in dark places (p. 43).Screen does not display properly while shooting.Please note, the following will not be recorded in still images, but will be recorded inmovies.• When shooting under fluorescent or LED lighting, the screen may flicker, and ahorizontal bar may appear.A flashing h appears on the screen and the shot cannot be taken eventhough the shutter button was pressed fully (p. 28).appears when the shutter button is pressed halfway (p. 52).• Set [IS Mode] to [Continuous] (p. 167).• Set the flash to h (p. 83).• Increase the ISO speed (p. 85).• Attach the camera to a tripod. Additionally, you should set [IS Mode] to [Off] whenshooting with a tripod (p. 167).Troubleshooting
