Print Quality Problems 9-35Troubleshooting9Q Is proper paper is not being used?A Replace the paper to a type that can be used with this machine. (See "PrintMedia Requirements," on p. 2-1.)Q Was data sent before completing calibration, such as before turning the powerON?A Make sure that the machine is ready, then send the data.Colored lines and text come out faint.Q Are thin lines or text being used?A Check [Prioritize Printing of Colored Lines and Text] in the printer driver.Specify [Prioritize Printing of Colored Lines and Text] in the [Detailed Settings]dialog box by clicking [Details] in the [Quality] sheet.Colored text appears to be blurred.Q Is a bold font being used for the colored text?A Specify [Matching Method] in the printer driver to [Perceptual [Photographic]].Specify [Matching Method] in the [Matching] sheet by checking [Manual ColorSettings] in the [Quality] sheet and clicking [Color Settings].The colors of thin lines or filled-in patterns are different from those specified, or do notappear.Q Are colors reproduced due to the combination of colors or patterns?A Adjust the colors with the application and print again.A Change the patterns with the application and print again.Q Does the color appear different depending on the fill-pattern?A Readjust to a darker color and print again.Fill-patterns are not printed in accurate color (specified color).Q Are the fill-pattern of the print data and the dither pattern of the printerinterfering with one another?A Do not specify a fill-pattern in the application and print again.
