General Problems 9-39Troubleshooting9General ProblemsThe machine has no power.Q Is the power cord plugged in securely?A Check that the power cord is plugged securely into the machine and into thewall outlet. Insert the power cord straight into the power socket on the back ofthe machine. Do not insert it at an angle. Otherwise, the machine may not beproperly connected to the power source and may not turn on. If this happens,disconnect the power cord, and reconnect it correctly after a minute or more.(Refer to the Quick Start Guide.)Nothing appears in the LCD.Q Is the power cord plugged in securely?A Check that the power cord is plugged securely into the machine and into thewall outlet. Insert the power cord straight into the power socket on the back ofthe machine. Do not insert it at an angle. Otherwise, the machine may not beproperly connected to the power source and may not turn on. If this happens,disconnect the power cord, and reconnect it correctly after a minute or more.(Refer to the Quick Start Guide.) If the LCD remains blank, unplug the machineand wait approximately 3 minutes to 5 minutes until the temperature inside themachine lowers, then plug it in again. If the LCD remains blank, unplug themachine, and contact Canon Authorized Service Facilities or the CanonCustomer Care Center.Q Does the Energy Saver key go off?A When the Energy Saver key lights up, the energy saver mode activates. Torestore the machine from the energy saver mode, press [Energy Saver].
