Sending FaxesChapter 6 Sending Faxes 6-333. When you finish entering numbers, press Start/Copy to beginsending, or wait a few seconds for the LASER CLASS 2060P to beginsending automatically.❏ The LASER CLASS 2060P then scans the document into memory,and begins sending it to the destinations in numerical order,starting with the one-touch speed dial numbers, then the codedspeed dial numbers, and finally the number dialed with thenumeric buttons.If the LASER CLASS 2060P memory becomes full while scanning yourdocument, MEMORY FULL appears in the LCD display. If this happens,remove the remainder of the document from the Automatic DocumentFeeder (ADF). (You may need to open the operation panel to do so. Seepage 6-24 for details.) Then divide the document into several sections andsend each section separately.Sending a Document Using Group DialingIf you frequently send faxes to the same group of people, you can create a“group.” Groups are stored under One-Touch Speed Dialing buttons orCoded Speed Dialing codes. See Chapter 5, “Speed Dialing” for details onregistering numbers under groups and using Group Dialing.Start / CopyN
