3 - 3CHAPTER 33. Left Cover1) Remove the screw2) Open the cover of the cartridge assembly.3) Remove the screw and, free the law under the areaindicated by an arrow, and free the hook; then,detach the left cover.[1] Screw [2] Arrow[3] Hook [4] ClawFigure 3-2-44. Upper Cover1) Remove the rear cover and the left/right cover.2) Disconnect the connector J203 from the enginecontroller PCB; then, free the harness from theguide.[1][2][4] [3][1] Connector[2] HarnessFigure 3-2-5[1][2]3) Remove the 2 screws, and free the 2 claws; then,detach the upper cover.[1][2][1][2][3][1] Screw [2] Claw[3] Upper coverFigure 3-2-65. Cartridge Cover1) Remove the rear cover and the left/right cover.2) Open the cartridge cover.3) Force the front cover down to detach.4) While pushing the claw, detach the cartridge coverfrom the arm.[1] Front lower cover[2] Claw[3] ArmFigure 3-2-7[1][2][3]
