[Use SNMPv3]Select the check box to enable SNMPv3. You can specify the rest of SNMPv3 settings only when this check boxis selected.[Enable User]Select the check box to enable [User Settings 1]/[User Settings 2]/[User Settings 3]. To disable user settings,clear the corresponding check box.[User Name]Enter up to 32 alphanumeric characters for the user name.[MIB Access Permission]Select [Read/Write] or [Read Only] for the access privileges to MIB objects.[Read/Write] Permits both viewing and changing the values of MIB objects.[Read Only] Permits only viewing the values of MIB objects.[Security Settings]Select [Authentication On/Encryption On], [Authentication On/Encryption Off], or [Authentication Off/Encryption Off] for the desired combination of authentication and encryption settings.[Authentication Algorithm]Click the [Authentication On/Encryption On] or [Authentication On/Encryption Off] for [Security Settings] forthe algorithm that corresponds to your environment.[Encryption Algorithm]Click the [Authentication On/Encryption On] for [Security Settings] for the algorithm that corresponds to yourenvironment.[Set/Change Password]To set or change the password, select the check box and enter between 8 and 16 alphanumeric charactersfor the password in the [Authentication Password] or [Encryption Password] text box. For confirmation, enterthe same password in the [Confirm] text box. Passwords can be set independently for authentication andencryption algorithms.[Context Name 1]/[Context Name 2]/[Context Name 3]Enter up to 32 alphanumeric characters for the context name. Up to three context names can be registered.7 Specify Printer Management Information Acquisition Settings.● With SNMP, the printer management information, such as printing protocols and printer ports, can bemonitored and obtained regularly from a computer on the network.Network213
