3 Click [OK].● To change the port number for multicast discovery, see Changing Port Numbers(P. 245) .Notifying a device management software of the power status of the machine1 Click [Edit] in [Sleep Mode Notification Settings].2 Select the [Notify] check box and specify the required settings.[Notify]Select the check box to notify a device management software of the power status of the machine. When[Notify] is selected, you can expect the machine to avoid unnecessary communication during sleep modeand reduce the total power consumption.[Port Number]Change the port number for this function according to the network environment.[Number of Routers to Traverse]Specify how many routers the notification packets can pass. Enter a number from 0 to 254.[Notification Interval]Specify how often the machine notifies a device management software of its power status. Enter anumber in seconds from 60 to 65535.3 Click [OK].5 Restart the machine.● Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.Network217
