Canon LBP6670dn Series Service Manual

22 2-222-22Technology > MEAP > Preparation for Using SMS > Device SettingsTechnology > MEAP > Preparation for Using SMS > Device Settings■ Device Settings● Network configuration ( Activate Netowork Settings )To support a MEAP-enabled iR device via network (SMS, etc.), set up the network setting onthe touch panel of the iR device (this setting is [ ON ] by default).1) Press [ Setup ] button, select [ Network ] > [ Control Menu ] > [ HTTP ] and select [ On ].SetupControl MenuPaper SourceNetworkLayoutNetworkControl MenuNetWare SettingsApple TalkSNMPv.1 SettingsTCP/IP SettingsRAW PrintIPP PrintWSDHTTPHTTPOffOn2) Select [ On ], and then press [ OK ] on the Control Panel.3) Restart the machine.CAUTION:• The setting [ Use HTTP ] is not actually enabled/disabled until you have restarted thedevice.• You cannot make a connection through a proxy server. If a proxy server is in use,enter the IP address of the MEAP device in the Exceptions field for the browser.Open Internet Options dialog of Internet Explorer and select Connections tab, LANSettings button, Use a proxy server option, and Advanced button of Proxy servergroup. Proxy Settings dialog will opens. The Exceptions field is in the dialog. Asnetwork settings vary among environments, consult the network administrator.• If Cookie and JavaScript are not enabled in the Web browser, you will not be able touse SMS.F-2-30● Key Pair and Server Certificate when Using Encrypted SSLCommunicationTo use SMS via SSL connection, it is required to specify a key pair and server certificate asthe key to be used.Since a key (default key) that can be used for encrypted SSL communication is installed asstandard on the device, advance setting of the key pair and server certificate is not required.In order to use an encryption key other than the default key, follow the procedure "Generatinga key pair" shown below to make settings for the key pair and server certificate necessary forencrypted SSL communication.Note:• The states of the SSL encryption key and the server certificate can be changed back tothe states at the time of shipment by executing CA-KEY clear in service mode level 2([COPIER] > [Function] > [CLEAR] > [CA-KEY]). Please note that the encryption keyscreated by the user and the server certificates added by the user are deleted when CA-KEY clear is executed.• For detailed procedures of the Default Key setting, refer to [e-Manual > Security].• As for SMS, by setting a Default Key, encrypted SSL communication is always executedregardless of the following setting: [Settings/Registration] > [Management Settings](Settings/Registration) > [MEAP Settings] > [SSL Settings]: ON/OFF.Generating a key pair1) From a PC on the same network as the device, use a web browser to access the remoteUI's portal page. Then, select [ Settings/Registration ] from the menu on the right side ofthe screen.URL to access: http://:8000/F-2-31