Video 1032 Touch a subject that appears inside the y frame.• The Touch AE mark (I) will flash and the exposure will be adjustedautomatically so the area you touched will be correctly exposed. Youhave the option to further adjust the exposure manually asnecessary.• You can touch [n] instead to adjust the exposure manually withoutactivating the Touch AE function.• The manual adjustment dial appears and the adjustment value is setat ±0.• Touch [n] again to return the camcorder to automatic exposure.3 Touch [Ï] or [Ð] or drag your finger along the dial to set theexposure adjustment value.The adjustment range may vary depending on the initial brightness ofthe image, and some values may be grayed out.4 Touch [X] to lock the exposure at the selected value.During exposure lock, y and the selected exposure adjustment valuewill appear on the screen.NOTES• If the recording program is changed during exposure lock, the cam-corder will return to automatic exposure.• When shooting subjects with a strong light source behind them, thecamcorder automatically corrects for the backlight*. You can turn off theautomatic backlight correction with the p > [Auto Backlight Cor-rection] setting. Note that the automatic backlight correction is not avail-able in the following cases.- In mode, when using a cinema-look filter other than [CinemaStandard].- When using the [ü SCN: Night Scene], [ý SCN: Snow], [þ SCN:Beach], [ÿ SCN: Sunset] or [œ SCN: Spotlight] recording program.* Except in mode when using a cinema-look filter other than [Cinema Stan-dard].COPY
