Canon LEGRIA HF R36 Instruction Manual

Also see for LEGRIA HF R306: Instruction manual Quick guide

Contents

Additional Information 179[Custom Control Button]: On the lower right of the recording screen, acontrol button that is a shortcut to one of the functions in the [ MainFunctions] panel is constantly displayed. By changing this setting, you canchange the shortcut, which will allow you to access one of your frequentlyused functions quickly and conveniently.• In mode, the default setting is [Ò Decoration]. In other modes, itis [È Powered IS].[Autostart Decoration]: When set to [i On], the decoration screen willopen automatically when you stow the LCD panel with the LCD screenfacing out.[Power Saving Mode]: Controls the camcorder’s automatic power off set-tings.[Auto Power Off]: In order to save power when the camcorder is poweredby a battery pack, it will automatically shut off if left without any operationfor 5 minutes.• Approximately 30 seconds before the camcorder shuts off, [Auto PowerOff] will appear. Operating any of the camcorder's controls while themessage is displayed will prevent the camcorder from shutting off.• In standby mode, the camcorder will shut off after the time selected forthe [Quick Start (Standby)] setting.[Quick Start (Standby)]: Select whether to activate the Quick Start function(A 51) when you close the LCD panel in a recording mode and thelength of time after which the camcorder will end the standby mode andshut off automatically.• You can set Quick Start to [Off], for example, if the camcorder is set ona fixed position and you want to keep recording video with the LCDpanel closed in order to conserve the battery’s power.[Battery Info]: When you are using an optional battery pack that is com-patible with Intelligent System, this option displays a screen where youcan verify the battery charge (as a percentage) and the remaining record-ing time ( , mode) or playback time ( , mode).[Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Con-trol) function. When you connect the camcorder to an HDTV compatiblewith HDMI-CEC using the supplied HDMI cable, you can control the cam-corder’s playback using the remote control of the TV.• If set to [i On], when the camcorder is connected to a compatibleHDTV using the supplied HDMI cable, the video input on the TV willautomatically be set to the camcorder’s video input. Then, you can usethe up/down/left/right buttons and the OK or SET button on the TV’sremote control to play back your recordings.COPY