Canon LEGRIA HF S11 Instruction Manual

Also see for LEGRIA HF S11: Specifications Instruction manual

Contents

Canon LEGRIA HF S11 Instruction Manual Manual pdf 156 page image

156 Additional InformationThe camcorder is connected using the optional HTC-100 HDMI Cable, but there is no picture orsound from the HDTV.- Disconnect the HTC-100 HDMI Cable and then restore the connection or turn the camcorderoff and then on again.The camcorder is connected using the optional HTC-100 HDMI Cable, but HDMI-CEC does notwork (cannot play back using the TV's remote control).- Disconnect the HTC-100 HDMI cable and turn off the camcorder and the TV. After a shortwhile turn them on again and restore the connection.- [Control for HDMI] is set to [Off]. Set it to [On].- HDMI-CEC is not activated on the connected TV. Activate this function on the TV.- Even with TV sets compatible with HDMI-CEC the range of functions available differs depend-ing on the type of TV. Refer to the instruction manual of the connected TV.The computer doesn't recognize the camcorder even though the camcorder is connectedcorrectly.- or [USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] orto [Connect and Set].- Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again andrestore the connection.- Connect the camcorder to a different USB port on the computer.The printer is not working even though the camcorder and printer are connected correctly.- or [USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] orto [Connect and Set].- Disconnect the USB cable and turn off the printer. After a short while turn it on again andrestore the connection.The camcorder doesn't recognize the DW-100 DVD Burner even though it is connectedcorrectly.- or [USB Connection Type] is set to [Computer/Printer]. Set it to [DVD Burner] orto [Connect and Set].List of MessagesFollowing the list of messages for the camcorder you can find separatelists for print-related messages ( 164) and for messages that appearonly when using the optional DW-100 DVD Burner ( 162).Access error- There was an error when reading the memory or attempting to write onto it.- This message can also appear if condensation has formed ( 172). Wait until the cam-corder dries completely before resuming use.(in alphabetical order)COPY