Video 69Automatic Backlight CorrectionWhen shooting subjects with a strong light source behind them, youcan have the camcorder automatically correct for the backlight.1 Open ( ) the joystick guide.2 Select ( ) [ BLC] and press .• appears.• Press again to turn off the backlightcorrection.Manual Focus AdjustmentAutofocus may not work well on the following subjects. In such case,focus manually.POINTS TO CHECK• Adjust the zoom before you start the procedure.1 Open ( ) the joystick guide.2 Select ( ) [ Focus] and press .The current focus is locked and “MF” appears.3 Push the joystick ( ) or ( ) once to verifyif the image is focused.• The center of the screen will be magnifiedto help you focus more easily. You can also turn off this function withthe or [Focus Assist Functions] setting.• When face detection is activated, instead of the center of the picture,the camcorder will magnify the face of the person identified as themain subject. If there is more than one person in the picture, you canselect the main subject manually.4 Adjust ( ) the focus as required.BLC• Reflective surfaces• Subjects with low contrastor without vertical lines• Fast moving subjects• Through wet windows• Night scenesOperating modes:FocusCOPY
