Additional Information 131[LCD Brightness]: Adjusts the brightness of the LCD screen.• Changing the brightness of the LCD screen does not affect the bright-ness of your recordings or the brightness of the playback image on aTV.[LCD Screen Dimmer]: When set to [ On], the LCD screen is dimmed.Doing so is ideal when using the camcorder in locations where the LCD’sillumination could become a nuisance to others. Hold presseddown for about 2 seconds to restore the LCD’s normal brightness.• Dimming the LCD screen does not affect the brightness of your record-ings or the brightness of the playback image on a TV.• When the screen dimmer is set to [ Off], the LCD screen will returnto the brightness level that was in use before the screen was dimmed.[TV Type]: When you connect the camcorder to a TV using the suppliedSTV-250N Stereo Video Cable, select the setting according to the type ofTV in order to display the picture in full and in the correct aspect ratio.[ Normal TV]: TV sets with 4:3 aspect ratio.[ Wide TV]: TV sets with 16:9 aspect ratio.• When the TV type is set to [ Normal TV], during the playback ofvideo originally recorded with an aspect ratio of 16:9, the picture will notbe displayed fullscreen.[Speaker Volume]: Adjust ( ) the volume of the playback. You can alsoadjust the volume using the joystick guide ( 43).[Demo Mode]: The demonstration mode displays the camcorder’s mainfeatures. It starts automatically when the camcorder is powered with thecompact power adapter if you leave it turned on without a memory cardfor more than 5 minutes.• To cancel the demo mode once it has started, press any button or turnoff the camcorder.System Setup 2Menu item Setting options[Notification Sounds] [ High Volume],[ Low Volume], [ Off]z z z –[Power Saving Mode] [ On], [ Off] z z z –[Quick Start] [ Off], [ 10 min],[ 20 min], [ 30 min]z – – –[Control for HDMI]1 [ On], [ Off] z z z –DISP.