132 Additional Information1 Option not available when the camcorder is connected to an HDTV using an HDMIcable.2 Option available only from the original movies index screen.[Notification Sounds]: A beep will accompany some operations like turn-ing on the camcorder, the self-timer countdown, etc.[Power Saving Mode]: In order to save power when the camcorder ispowered by a battery pack, it will automatically shut off if left without anyoperation for 5 minutes.• Approximately 30 seconds before the camcorder shuts off, [Auto PowerOff] will appear.• In standby mode, the camcorder will shut off after the time selected forthe [Quick Start] setting.[Quick Start]: Select whether to activate the Quick Start function ( 41)when you close the LCD panel in a recording mode and the length of timeafter which the camcorder will end the standby mode and shut off auto-matically.[Control for HDMI]: Activates the HDMI-CEC (Consumer Electronics Con-trol) function. When you connect the camcorder to an HDTV compatiblewith HDMI-CEC using an HDMI cable, you can control the camcorder’splayback using the remote control of the TV.• If set to [ On], when the camcorder is connected to a compatibleHDTV using an HDMI cable, the video input on the TV will automaticallybe set to the camcorder’s video input. Then, you can use the up/down/left/right buttons and the OK or SET button on the TV’s remote controlto play back your recordings./ /[Initialize / ][Initialize ]/ /[Built-in Mem.], [Mem. Card]z z2 z 36[Quick Initialization],[Complete Initialization][Photo Numbering] [ Reset], [ Continuous] z z z –[Firmware] – – – z –[Reset All] [No], [Yes] z z z –[Eye-Fi Communication] [ Automatic], [ Off] z z z 121Menu item Setting options
