Canon LV-7565 Specification

Also see for LV-7565: Specifications Brochure & specs Brochure Owner's manual

Canon LV-7565 Specification Manual pdf 26 page image

Expand Serial Command Specification Page 25 of 468.7.5. CF_KEYSTONE CommandCommand “CF_KEYSTONE_%1” [CR]%1“UP” --------- Make the screen image length at the top edge shorter with asmall range.“FUP” ------- Make the screen image length at the top edge shorter with a largerange.“DN” -------- Make the screen image length at the bottom edge shorter with asmall range.“FDN” ------ Make the screen image length at the bottom edge shorter with alarge range.“LEFT” ----- Make the screen image length at the left edge shorter with asmall range.“FLEFT” --- Make the screen image length at the left edge shorter with a largerange.“RIGHT” --- Make the screen image length at the right edge shorter with asmall range.“FRGT” ---- Make the screen image length at the right edge shorter with alarge range.“RST” ------- Keystone offDetailsChange Keystone range. (Only valid when it is in the usual Power On state)When the range is over the maximum, a Projector accepts the Command, but itdoes not execute.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.6. CF_KYSTNMODE CommandCommand “CF_KYSTNMODE_%1” [CR]%1 “STR” ---------- Set Keystone store mode to Store“RST” ---------- Set Keystone store mode to ResetDetails Set Keystone store mode. (Only valid when it is in the usual Power On state)Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]8.7.7. CF_ ANAMORPHIC CommandCommand “CF_ANAMORPHIC_%1” [CR]%1 “ON” ---------- Set Anamorphic to On“OFF” --------- Set Anamorphic to OffDetailsSet Anamorphic On / Off. (Only valid when it is in the usual Power On state)When Anamorphic set to On, the screen will be 4:3 even if it is HDTV.When Anamorphic set to Off, HDTV will be 16:9.Acceptable “000” [CR]ResponseUnacceptable “Error Code” [CR]