System Settings 5-115Summary of Important SettingsCF-PL Reference Guide_USEN HT1-2187-000-V.1.0Setting ItemsSettings DescriptionSYSTEM SETTINGSPASSWORDEnter the system password protecting the system settings.(You do not have to do this if the system settings are not yetpassword protected.) (See Chapter 4, “Restricting the Use ofthe Machine.”)1.SYS. ADMIN. INFO Set the System Administrator’s ID and password to protect thesystem settings. You cannot use ‘0’ for the SystemAdministrator's ID.If you set the System Administrator’s ID to 0, the registeredSystem Administrator’s ID is deleted.1.SYS. ADMIN. ID. 1-99999992.SYSTEM PASSWORD 1-99999993.E-MAIL ADDRESS Up to 60 characters2.DEPT.ID MANAGEMNT Set restrictions for sending and printing with Department IDsand passwords. (See Chapter 4, “Restricting the Useof the Machine.”)OFF* Department ID management function is turned ‘OFF’.ON Department ID management function is turned ‘ON’. Set howthe use of the machine will be restricted.1.DEPT. ID ENTRY Set the Department ID number from 00 to 99, and enter theDepartment ID from 1 to 9999999. You cannot set theDepartment ID and password to 0.1.PASSWORD 1-99999992.COPY LIMITS 0-9999993.TX LIMITS 0-9999994.SELECT SENDER Select one of the registered sender names to be used as TXterminal ID for the documents sent by the department.For details about registering the sender names, see Chapter 1,“Before You Start Using This Machine,” in theFacsimile Guide.2.COUNT MANAGEMENT1.COUNT INFORMATION Display the counter information for each department.1.PRINT COUNT2.SEND COUNT2.COUNT RESET1. ON*2. OFFReset the counter.An asterisk (*) indicates the default setting.
