Canon Laser Class 700 Series Setup Manual
Also see for Laser Class 700 Series: Facsimile guideSpecificationDatasheetNetwork guideReference guide
                              | |
Contents
| 
Making Connections1-4Connecting the Machine to a Network1Connecting to a 100Base-TX NetworkConnect the 10Base-T/100Base-TX cable to the hub port using a Category 5 ratedtwisted-pair LAN cable for use on a 100Base-TX network. Then, connect the10Base-T/100Base-TX cable to the optional network card at the back of the LASERCLASS 700 Series machine. If your computer is not compatible with a 100Base-TXnetwork, you would also need a 100Base-TX network board.NOTEThe hub, LAN cable, and network board that is connected to the LAN, should becompatible with a 100Base-TX network. For details, contact your local authorized Canondealer.100Base-TX Hub100Base-TXCableComputer with a100Base-TX PortComputer without a100Base-TX Port100Base-TXLAN Board10Base-T/100Base-TXPort |
Related manuals for Canon Laser Class 700 Series
Canon Laser Class 700 Series Reference Manual
Canon image CLASS Setup Manual
Canon LASER CLASS 810 Service Manual
Canon LASER CLASS 3175 Service Manual
Canon CLC5100 Series Manual
Canon pixma mg3500 series Setup Manual
Canon PIXMA MG5500 Series Setup Manual
Canon CLI-8 Series Manual
Canon Laser Class 2060 User Manual
Canon Laser Class 810 Starter Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine