Troubleshooting164To use the wireless function, insert the Eye-Fi card into slot B.- You may have inserted the Eye-Fi card into memory card slot 2. Insert it into memory card slot3.To use this function change the camcorder's mode from ó to M/CINEMA- C, the CUSTOM dial (A 84) and some of the functions that can be assigned to theassignable buttons (A 85) cannot be used in mode. Set the mode switch to n (mode) or E( mode) to use them.Too many photos. Disconnect the USB cable.- Disconnect the USB cable. Try using a memory card reader or decrease the number of photoson the memory card to fewer than 2,500 photos (Windows), or 1,000 photos (Mac OS).- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, andrestore the connection after a short while.Total play time is too long- When converting scenes from a story, the maximum total playback time of the scenes to beconverted is 12 hours (when converting individual scenes) or 2 hours and 30 minutes (whenconverting stories). Reduce the number of scenes to be converted to SD.Unable to recover data- Could not recover a corrupted file. Save your recordings (A 127) and initialize the memoryusing the [Complete Initialization] option (A 35).Unsupported gallery data detected. Cannot record or edit. Delete gallery data?- The gallery data of the movies in the selected memory card is not supported. The movies canbe played back but you cannot edit them or record additional scenes to this gallery. Select[Yes] to delete the unsupported gallery data. Note that after doing so, you will not be able toplay back the movies with the device originally used to record the unsupported gallery data.COPYDownloaded From VideoCamera-Manual.com Manuals
