Wi-Fi Functions 1674 Touch the [Encryption Key] control button to enter the encryptionkey or password of the wireless access point and then touch [OK].• If the encryption method of the wireless access point is set to WEP,the WEP index key will appear on the screen. Select the same indexkey of the access point.5 Touch [Automatic] to automatically obtain an IP address.• To assign the IP address manually, touch [Manual] and perform theprocedure in To manually assign an IP address (A 165).• A screen to test the settings will appear.6 Select whether to test the settings.• You can touch [Check Current Configuration] to review the networksettings.• If you touched [Yes], a test of the settings will be performed and aconfirmation screen will appear. Touch [OK].7 Save the settings of the connection point.* After touching [OK], you can review the network settings. Touch [Wi-Fi Setup]> [Check Current Configuration] > Desired connection point > [Î] or [Í]> [K] three times when finished.To manually enter a wireless access point (step 3)Enter the details of the wireless access point.* If you select [Open], you can select [No Encryption] or [WEP]. If you select,[Open] > [WEP] or [Shared Key WEP], you will need to specify the WEP indexkey.[Yes] > [OK]* > [X]Enter the access point’s SSID > [OK] > [OK] > Enterthe authentication/encryption method* and, if applicable,the encryption key of the access point > [OK] >Continue to step 5COPY
