Additional Information 193• Changing the brightness of the LCD screen does not affect the bright-ness of your recordings or the brightness of the playback image on aTV.• Using the bright setting will shorten the effective usage time of the bat-tery pack.[LCD Mirror Image]: When set to [i On], you can rotate the LCD panel180 degrees to let the subject check the image while you record. Whilethe LCD panel is rotated toward the subject you will not be able to deco-rate the scene.[Notification Sounds]: A beep will accompany some operations like turn-ing on the camcorder, the self-timer countdown, etc.• Set this to [j Off] to turn off notification sounds.• While pre-recording (A 98) is activated, the camcorder will not emitany notification sounds.[Wireless Remote Control]: Allows the camcorder to be operated with theoptional WL-D89 Wireless Controller.[Custom Control Button]: On the lower right of the recording screen, acontrol button that is a shortcut to one of the functions in the [ MainFunctions] panel is constantly displayed. By changing this setting, you canchange the shortcut, which will allow you to access one of your frequentlyused functions quickly and conveniently.• In mode, this option is set to [Ò Decoration]. In other modes,the default setting is [È Powered IS].[Autostart Decoration]: When set to [i On], the decoration screen willopen automatically when you stow the LCD panel with the LCD screenfacing out.[Power Saving Mode]: Controls the camcorder’s automatic power off set-tings.[Auto Power Off]: In order to save power when the camcorder is poweredby a battery pack, it will automatically shut off if left without any operationfor 5 minutes.• Approximately 30 seconds before the camcorder shuts off, [Auto PowerOff] will appear. Operating any of the camcorder's controls while themessage is displayed will prevent the camcorder from shutting off.• In standby mode, the camcorder will shut off after the time selected forthe [Quick Start (Standby)] setting.COPY