Canon MAXIFY GX2000 Series Online Manual

Selects whether to receive faxes in Error Correction Mode (ECM).Transmission/Reception of Faxes Using ECM◦ TX start speed◦Selects the fax transmission speed.The fax transmission start speed will be faster as the value is bigger.When the telephone line condition or connection is poor, selecting a lower transmission startspeed may solve transmission problems.◦ RX start speed◦Selects the fax reception speed.The fax reception start speed will be faster as the value is bigger.When the telephone line condition or connection is poor, selecting a lower reception start speedmay solve reception problems.Auto print settings• Received documents•Selects whether to print the received fax automatically when receiving a fax.If you select Do not print, the received fax is stored in the printer's memory.For details on the received fax stored in the printer's memory:Document Stored in Printer's Memory• Activity report•Selects whether to print ACTIVITY REPORT automatically.If you select Print, the printer prints ACTIVITY REPORT for the 20 histories of sent and receivedfaxes automatically.For details on the procedure to print ACTIVITY REPORT manually:Summary of Reports and Lists• TX report•Selects whether to print TX REPORT/ERROR TX REPORT automatically after sending a fax.If you print the report, select Print error only or Print for each TX.If you select Print error only or Print for each TX, you can specify the print setting that the first pageof the fax is printed along with the report.• RX report•Selects whether to print RX REPORT automatically after receiving a fax.If you print RX REPORT, select Print error only or Print for each RX.179