Canon MAXIFY GX2000 Series Online Manual

If or icon is displayed.or icon indicates that the wireless router and the printer are not connected. Check the setting ofprinter. Reconsider the location of the wireless router and the printer in the next check.If icon is displayed."Easy wireless connect" is waiting for setup. Connect a device to the printer with the application on computer,smartphone or tablet.If or icon is displayed.The printer is not set to use Wi-Fi.Select (Setup) on HOME screen > Printer settings > LAN settings > Wi-Fi in this order, and selectEnable for Enable/disable Wi-Fi.For Wired LAN1. Check the power and LAN cable.1.When the printer cannot be found on the setup screen, using LAN connection setup, make sure thatall the network devices are connected to the router and the hub via LAN cables and that all thedevices are turned on.• If LAN cable is not connected:•Connect the router, hub, computer and printer via LAN cables.Make sure the printer is turned on.Turning the Printer On and OffMake sure the printer, the router and the hub are turned on.• If LAN cable is connected, and printer and network device are off:•Turn on printer and network device.• If LAN cable is connected, and printer and network device are on:•Turn them off and on again.Note• Some devices require a couple of minutes after being turned on to become ready for use.•Wait until all devices are ready before proceeding.2. Check printer's Wired LAN settings.2.542