Starting Remote UI2KUS-073To operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.Check the IP address set to the machine in advance ( Viewing Network Settings(P. 38) ). If you have any questions,ask your Network Administrator.1 Start the Web browser.2 Enter "http:///" in the address field, and press the[ENTER] key.● If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://[fe80::2e9e:fcff:fe4e:dbce]/).If a security alert is displayed● A security alert may be displayed when the Remote UI communication is encrypted ( Configuring theKey and Certificate for TLS(P. 307) ). When certificate settings or TLS settings have no errors, continuebrowsing the Web site.3 Log in to the Remote UI.When a System Manager PIN is not setSelect [System Manager Mode] or [General User Mode].[System Manager Mode]You can perform all the Remote UI operations and settings.[General User Mode]You can check the status of documents or the machine, and you can also change some of the settings. Whenyou want to check if a specific document of yours is in the print queue or cancel the printing of a documentof yours in the print queue, enter the user name of the document in [User Name]. The user name isautomatically set to print documents based on information such as your computer name or computer loginname.[Remote UI Access PIN]If [Remote UI Access PIN] is set, enter the PIN. Setting a Remote UI PIN(P. 294)Managing the Machine334
