Chapter 2᤹ Running H/F 52-122.6 External and Controls2.6.1 Power Supply2.6.1.1 EnergySaving Function2.6.1.1.1 Overview 0007-6468This machine has the Energy Saver mode. When Energy Saver in the User Menu is set to ON, and no operation ismade for approx. 5 minutes or more in the standby mode, the machine enters the Energy Saver mode. When theEnergy Saver key on the control panel is pressed, it also enters the Energy Saver mode.In the Energy Saver mode, the machine turns off all the LED except Energy Saver key and LCD indications, and thesystem function will enter the Sleep mode. But the printer section will not enter the Sleep mode.Recovery from the Energy Saver ModeIn the Energy Saver mode, the machine always monitors the following activities which are the triggers toresume the operations. When the machine detects any of them, it returns to the standby mode.The Energy Saver key on the operation panel is pressedA print job is acceptedPaper is set at the Multipurpose feederThe front cover is opendMemoIn any of the following states, the machine will not enter the Energy Saver mode.During the print, scanning operationOut of paper, jam, out of toner, open the front cover, or a service errorEnergy Saver in the User Menu is turned offEnergy Saver SettingTo make the Energy Saver mode function, it is necessary to set ENERGY SAVER of TIMER SETTINGS in the UserMenu to ON. In this setting, you can set the period of time from the end of the machine operation to entering theEnergy Saver mode (330 min).
