Canon MF3110 - ImageCLASS Laser Multifunction Service Manual

Also see for imageCLASS MF3111: Software guide Basic guide Specification

Contents

Chapter 33-173.1.11.4 Removing the frontcover 0007-75361) Open the front cover [1] and remove the arm claws[2] to disengage the connection.2) Remove the shafts on both sides [3] while warpingthe shaft arms inside, and remove the front cover.F-3-673.1.11.5 Removing the rearcover 0007-75371) Opening the faceup cover [1], and then lower thefixing pressure release levers [2] on both sides andrelease the pressure.2) Remove 2 screws [3].3) Remove the rear cover [4] as you pull it toward you.F-3-683.1.11.6 Removing the ScannerUnit 0007-75381) Remove the connector [1] and the flat cable [2] onthe ECNT board, and remove the screw [3].(Remove the flat cable from the core.)2) Remove the 2 screws [4] and the 2 pins [5] on theright and left sides.F-3-693) Remove the 2 screws on the back [1]. Slide thescanner unit [2] to the back; then, remove it bylifting it.F-3-70[1][3][3][2][1] [4][3] [3][2][2][4][3][1][5][1][2]