12-41Machine SettingsSYSTEM SETTINGS8. POP PASSWORD Enters the password for access to the POP server (max. 32characters).9. POP INTERVAL Sets the interval you want the POP server to check for incominge-mail. If the interval is set to 0, the POP server is not checkedautomatically (0MIN.–99MIN.).8. STARTUP TIME SET. Sets the time period required to delay the startup of networkcommunications for the machine (0SEC–300SEC).6. COMMUNICATIONS* Sets the fax and e-mail communication.1. COUNTRY SELECT Select the country or area where the machine is used.2. E-MAIL SETTINGS Sets the e-mail communications.1. MAX TX DATA SIZE Sets the maximum data size for outgoing e-mail messages. Ifthe e-mail message exceeds this data size limit, it is split up intoseveral e-mail messages before being sent (0MB-99MB).2. DIVIDED OVER MAX Sets whether to divide a document into separate files when it issent if its size exceeds the data size you specify.OFFON––3. FAX SETTINGS Sets the facsimile communication.1. TX START SPEED Sets the transmission start speed for faxes.(33600bps, 2400bps, 4800bps, 7200bps, 9600bps, 14400bps)2. RX START SPEED Sets the reception start speed for faxes. (33600bps, 2400bps,4800bps, 7200bps, 9600bps, 14400bps)3. R-KEY SETTING Registers the [R] key to access an outside line easily. (SeeChapter 4, “Sending and Receiving (MF4690PL Only),” in theReference Guide.)PSTNPBX (HOOKING/PREFIX)––4. MEMORY LOCK Sets whether to receive and store all documents in memoryand not to print automatically. (See Chapter 4, “Sending andReceiving (MF4690PL Only),” in the Reference Guide.)* MF4690PL Only
