|
2-9Paper Handling2Specifying the Paper Type is selected as the default paper type. When using paper other than plain paper, youcan specify the paper type according to the following. Specifying the paper type can prevent poor copyquality, or the printout not being printed correctly.1 Press [Menu].2 Press [ (-)] or [ (+)] to select ➞ press [OK].3 Press [ (-)] or [ (+)] to select or ➞ press [OK].4 Press [ (-)] or [ (+)] to select ➞ press [OK].5 Press [ (-)] or [ (+)] to select the appropriate paper type ➞ press [OK].You can select from the following paper types:- Plain paper (64 g/m2 to 90 g/m 2): , * 1- Heavy paper (91 g/m2 to 128 g/m 2): , *2- Transparency: - Envelope: , *2*1 If paper curls excessively when printed with selected, select .*2 If print fixing is not sufficient when printed with selected, select .6 Press [Stop/Reset] to return to the standby display.Orientation of the Document and the Paper LoadingWhen you load or place a document in the ADF or on the platen glass, the orientation of the documentand the orientation of the paper in the cassette or in the multi-purpose feeder are as shown below.DocumentCopyDocumentPaperCassette Multi-purposefeederPlaten glassADF PreviousNext |