If an Error OccursWhen an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshootingmessage is displayed automatically. Take the appropriate action described in the message.When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed onthe computer screen. For some errors, the ON lamp and the Alarm lamp flashes alternately. Check thestatus of the lamps and the message, then take the appropriate action to resolve the error.Support Code Corresponding to the Number of Flashes of the Alarm LampExample of 2 times flashing:(A) Flashes(B) Goes offNumber of flashes Cause Support Code2 flashes The machine is out of paper, or paper does not feed. 1003The paper size in the print settings and the size of the loaded paper donot match.2100, 21013 flashes The paper output tray is closed. 1250Paper is jammed in the paper output slot. 1300Paper is jammed inside the machine at the transport unit. 1303Paper is jammed when performing automatic duplex printing. 13044 flashes The FINE cartridge is not installed properly. 16875 flashes The FINE cartridge is not installed. 1401Appropriate FINE cartridge is not installed. 1403, 14856 flashes The paper output cover is open. 12027 flashes The FINE cartridge is not installed in the correct position. 1486, 14878 flashes The ink absorber is almost full. 1702, 1703, 1704,1705, 1712, 1713,1714, 17159 flashes The protective material for the FINE Cartridge holder or the tape mayremain attached to the holder.189093
