Canon PIXMA MP Series Installation/troubleshooting Manual

Also see for iP1700 - PIXMA Color Inkjet Printer: Supplementary guide Brochure Easy Setup instructions Quick start guide Quick start guide

PIXMA IP Series PrinterIncluding:IP1600Ink Compatibility PG-40 Black, CL-41 ColorIP1700Ink Compatibility PG-40 Black, CL-41 ColorIP1800Ink Compatibility PG-30 Black, CL-31 ColorInstall cartridge.Message 1:“The ink cartridge has been installed or replaced. If theprint out contains misaligned lines or is not satisfactoryafter the installation or replacement, refer to the user’sguide and carry out the print head alignment.”OKClick OK to continue. Printer will start printing.If second message appears and yellow light flashes:“The following may have run out of color. The function fordetecting the remaining ink level will be disabled since theink level cannot be correctly detected. If you want tocontinue printing with out this function, press the printer’sresume button for at least 5 seconds. Canon recommendsusing new genuine Canon cartridges in order to obtainoptimum quality. Please be advised that Canon shall notbe liable for any malfunction or trouble caused by continu-ation of printing under the ink out condition.”Cancel Printing About inkDo not click “cancel printing”. Press and hold downprinter resume button until the yellow light disappears andthe green light stays on. Printer will start printing. Thisaction will bypass the ink level detection from the recycledcartridge. It will not damage the printer! With a recycledcartridge this action needs to be done one time.A full recycled cartridge ink level may not display correctly.It may show empty.If you want to check the ink level, you can do a “Nozzlecheck” by following the directions below:Go to menu File select print click on “Property” clickon “Maintenance”Click on “Nozzle check” to print out the color check.Click on “Cartridge Alignment” to align the cartridge.PIXMA MP series printerIncluding:MP150Ink Compatibility PG-40 Black, CL-41 Color,PG-50 Black,CL-51 ColorMP160Ink Compatibility PG-40 Black, CL-41 Color, PG-50 Black,CL-51 ColorMP170Ink Compatibility PG-30 Black, CL-31 ColorMP180Ink Compatibility PG-40 Black, CL-41 Color, PG-50 Black,CL-51 ColorInstall cartridge.Message 1:“The ink cartridge has been installed or replaced. If the printout contains misaligned lines or is not satisfactory after theinstallation or replacement, refer to the user’s guide andcarry out the print head alignment.”OKClick OK to continue.If second message appears and yellow light flashes:“The following may have run out of color. The function fordetecting the remaining ink level will be disabled since theink level cannot be correctly detected. If you want tocontinue printing with out this function, press the printer’sstart button. Canon recommends using new genuine Canoncartridges in order to obtain optimum quality.”Cancel Printing About inkDo not click “cancel printing”. Press printer start buttonto start printing. This action will bypass the ink leveldetection from the recycled cartridge. It will not damage theprinter! With a recycled cartridge this action needs to bedone one time.A full recycled cartridge ink level may not display correctly.It may show empty.If you want to check the ink level, you can do a “Nozzlecheck” by follow the directions below:Go to menu File select print click on “Property” clickon “Maintenance” Click on “Nozzle check” to print out the color check. Click on “Cartridge Alignment” to align the cartridge.Canon Recycled Cartridge Installation & Trouble ShootingFor more information please visit http://www.usa.canon.com/home 10/23/08