Canon MG3560 Online Manual

Also see for Pixma MG3500 Series: Getting started guide Setup guide User guide Online manual Online manual

If the print head alignment sheet was not printed correctly, press the Stop button, then redo this procedurefrom the beginning.5. Scan the print head alignment sheet to adjust the print head position.(1) Load the print head alignment sheet on the platen glass.Load the print head alignment sheet WITH THE PRINTED SIDE FACING DOWN and align the mark on thebottom right corner of the sheet with the alignment mark .(2) Close the document cover gently, then press the Color button or the Black button.The machine starts scanning the print head alignment sheet, and the print head position will be adjustedautomatically.The print head position adjustment will be complete when the ON lamp lights green after flashing.Remove the print head alignment sheet on the platen glass.ImportantDo not open the document cover or move the print head alignment sheet on the platen glass until adjustingthe print head position is complete.If adjusting the print head position has failed, the Alarm lamp flashes orange. Press the Stop button torelease the error, then take appropriate action.If an Error OccursNoteIf the print results are still not satisfactory after adjusting the print head position as described above, adjust the printhead position manually from the computer.Aligning the Print Head Position from Your ComputerTo print and check the current head position adjustment values, hold down the Stop button until the Alarm lampflashes orange six times, then release it immediately.104