Canon MG3560 Online Manual

Also see for Pixma MG3500 Series: Getting started guide Setup guide User guide Online manual Online manual

Safety PrecautionsChoosing a locationDo not install the machine in a location that is unstable or subject to excessive vibration.Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or close to aheating source.To avoid the risk of fire or electric shocks, use the machine under the operating environment specified in theOn-screen Manual.Do not place the machine on a thick rug or carpet.Do not place the machine with its back attached to the wall.Power supplyEnsure that the area around the power outlet is kept clear at all times so you can easily unplug the power cordif necessary.Never remove the plug by pulling on the cord.Pulling the cord may damage the power cord, leading to possible fire or electrical shock.Do not use an extension lead/cord.Working around the machineNever put your hands or fingers in the machine while it is printing.When moving the machine, carry the machine at both ends. In case the machine weighs more than 14 kg, it isrecommended to have two people lifting the machine. Accidental dropping of the machine causes injury. Forthe machine's weight, refer to the On-screen Manual.Do not place any object on the machine. Especially do not place metal objects (paper clips, staples, etc.) orcontainers of flammable solvents (alcohol, thinners, etc.) on top of the machine.Do not transport or use the machine on a slant, vertically or upside-down, as the ink may leak and damage themachine.Working around the machine (For the multifunction printer)When loading a thick book on the Platen Glass, do not press hard on the Document Cover. The Platen Glassmay break and cause injury.Print Heads/ink tanks and FINE CartridgesKeep ink tanks out of the reach of children. In case ink* is accidentally licked or swallowed, rinse out mouth orgive one or two glasses of water to drink. If irritation or discomfort occurs, obtain medical advice immediately.* Clear Ink contains nitrate salts (For models containing Clear Ink).In case ink gets in contact with eyes, rinse with water immediately. In case ink gets in contact with skin, washwith soap and water immediately. If irritation to eyes or skin persists, obtain medical advice immediately.Never touch the electrical contacts on a Print Head or FINE Cartridges after printing.The metal parts may be very hot and could cause burns.Do not throw ink tanks and FINE Cartridges into fire.Do not attempt to disassemble or modify the Print Head, ink tanks, and FINE Cartridges.47