Changing the Machine Operation ModeIf necessary, switch between various modes of machine operation.The procedure for configuring Custom Settings is as follows:1. Make sure that the machine is on, and then select Custom Settingsfrom the pop-up menu on the Canon IJ Printer UtilityNoteIf the computer is unable to communicate with the machine, a message may bedisplayed because the computer cannot access the function information that wasset on the machine.If this happens, click Cancel to display the most recent settings specified on yourcomputer.2. If necessary, complete the following settings:Ink Drying Wait TimeYou can set the length of the machine rest time until printing of the next page begins.Moving the slider to the right increases the pause time, and moving the slider to theleft decreases the time.If the paper gets stained because the next page is ejected before the ink on theprinted page dries, increase the ink drying wait time.Reducing the ink drying wait time speeds up printing.Display Guide MessageDisplays a guide when you perform operations in which the paper setting procedureis complicated.Hagaki PrintingDisplays the guide message before the machine begins hagaki printing.To hide the guide messages starting from the next execution of other thanplain paper printing, select the Do not show again check box in the displayeddialog.To display the guide messages again, display the Canon IJ Printer Utility pop-up menu, select Custom Settings, and then check the Hagaki Printing checkbox.ImportantWith Mac OS X v10.8 or Mac OS X v10.7, you cannot use Display GuideMessage.238
