To adjust the amount that the document extends beyond the paper, click the PageSetup tab, choose Borderless, and enter the value in Amount of Extension.Grayscale PrintingThis function converts the data to monochrome data when printing your document.DraftThis setting is appropriate for test printing.Rotate 180 degreesPrints the document by rotating it 180 degrees against the paper feed direction.The width of print area and the amount of extension that are configured in otherapplication software will be reversed vertically and horizontally.Color/Intensity Manual AdjustmentSelect when you set the Color Correction method and individual settings such asCyan, Magenta, Yellow, Tone, Brightness, Intensity, and Contrast, etc.ImportantDepending on the printing profiles that were selected in Commonly Used Settings,certain function may be grayed out and you will not be able to change them.Media TypeSelects a type of printing paper.Select a media type that matches the paper that is loaded in the printer. This ensures thatprinting is carried out properly for the specified paper.Printer Paper SizeSelects the size of paper actually loaded into the machine.Normally, the paper size is set automatically according to the output paper size setting, andthe document is printed with no scaling.When you set 2-on-1 Printing or 4-on-1 Printing in Additional Features, you canmanually set the paper size with Page Size on the Page Setup tab.If you select a paper size that is smaller than the Page Size, the page image will bereduced.If you select a paper size that is larger than the Page Size, the page image will be enlarged.Custom Paper Size dialog boxThis dialog box allows you to specify the size (width and height) of the custom paper.UnitsSelect the unit for entering a user-defined paper size.116
