About PictBridge (Wireless LAN) Print SettingsSettings on a PictBridge (Wireless LAN) Compliant DeviceSettings on the MachineSettings on a PictBridge (Wireless LAN) Compliant DeviceThis section describes the PictBridge (Wireless LAN) function of the machine. For the print settings on aPictBridge (Wireless LAN) compliant device, refer to the instructions given in the device's instructionmanual.Note• In the following description, names of setting items are given according to those used in Canon-brandPictBridge (Wireless LAN) compliant devices. Setting item names may be different depending on thebrand or model of your device.• Some setting items explained below may not be available on some devices. In this case, the settingsmade on the machine are applied. Also, when some items are set to Default on a PictBridge(Wireless LAN) compliant device, the machine settings for these items are applied.PictBridge print settings• Depending on the PictBridge (Wireless LAN) compliant device, you can print a photo onto the disclabel of the printable disc.The following settings can be used when printing from a PictBridge (Wireless LAN) compliant device.Paper size 4" x 6"/ 10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter)* Can be selected only on certain Canon-brand PictBridge (Wireless LAN) compliant devices. (Maynot be selected depending on the device.)Paper type Default (Selections based on the machine setting)Photo:Photo Paper Plus Glossy II PP-201/Photo Stickers** When printing on sticker paper, select 4"x6"/10x15cm in Paper size. Do not set Layout toBorderless.Fast Photo:Photo Paper Pro Platinum PT-101Plain:A4/LetterWhen Paper type is set to Plain, borderless printing will be disabled even when Layout is set toBorderless.Layout Default (Selections based on the machine setting), Index, Bordered, Borderless, N-up (2, 4, 9, 16)*1,20-up*2, 35-up*3*1 Layout compatible with A4 or Letter-sized paper and Canon-brand sticker above.A4/Letter: 4-upPhoto Stickers: 2-up, 4-up, 9-up, 16-up.*2 With a Canon brand PictBridge (Wireless LAN) compliant device, selecting items with "i" markallows you to print shooting info (Exif Data) in list format (20-up) or on the margins of the specifieddata (1-up). (May not be available with some Canon-brand PictBridge (Wireless LAN) compliantdevices.)227
