Advanced Guide > Printing Using the Operation Panel of the Machine > Copying > Making Copies > Reducing or Enlarginga CopyReducing or Enlarging a Copy1. Make sure that the machine is turned on.2. Press the Menu button, then press the OK button to select Copy if another modehas been selected.NoteRemoving the memory card in the Card Slot or the PictBridge compliant device connected tothe Direct Print Port returns to the copy mode.3. Load paper on the Rear Tray.4. Load the original document on the Platen Glass.5. Press the button.The paper setting screen is displayed.6. Press the button to select 100%.7. Use the button to select Fit-to-page.NoteYou can select Fit-to-page when Standard copy or Borderless copy is selected.Copied images are automatically reduced or enlarged in the lengthwise/widthwise direction tofit the page size you select.Select 100% if you do not reduce or enlarge a copy.8. Press the OK button.The LCD returns to the copy mode screen.9. Use the button to specify the number of copies.NotePressing the Back or Stop button returns the number of copies to 1.10. Press the Color button for color copying, or the Black button for black & whitecopying.The machine starts fit-to-page copying.ImportantDo not open the Document Cover or remove the original from the Platen Glass until copying iscomplete.NoteTo cancel copying, press the Stop button.Page topPage 282 of 681 pagesReducing or Enlarging a Copy