102Screen Displays during Movie Recordingq "e" Card Access Displayw Movie recording timee Image Sizer Remaining Card Capacity forMoviesIndicates that the camcorder is writingon the memory card.Indicates the recording time of the movie.Indicates the movie size.Indicates the remaining time in hoursand minutes. At less than 1 minute, theremaining time will be displayed in 10second-steps, at less than 10 seconds in1 second-steps.• The indication varies depending onthe recording condition. The actualremaining time may be longer orshorter than indicated.Recording from Other Video DevicesYou can record movies from devices connected via the S-video terminal or AV terminal(analog line-in function), or via the DV terminal on a memory card.For connecting instructions, refer to page 33 and 81.1. Set the camcorder to PLAY (VCR) mode.• If a cassette is loaded, make sure the tape is stopped.• When recording via the AV terminal, make sure that “AV\DV” is displayed on thescreen. When recording via the DV terminal, make sure that “AV\DV” is notdisplayed. Change the setting as necessary ( 87).2. Connected device: Load a recorded cassette and play back the tape.3. Press the start/stop button when the scene you wish to record appears.4. Press the start/stop button to stop recording.When recording from a tape in the camcorder or other video devices:❍ A movie recorded from an image in 16:9 format will be vertically compressed.❍ The data code of the movie will reflect the date and time it has been recordedon the memory card.❍ Recording stops at blank sections or recordings in different audio mode(12bit/16bit).CARD PLAYCARD CAMERAPLAY (VCR)CAMERAqwer
