15Basic Functions -PreparationsEInstalling the Backup BatteryThe backup battery allows the camcorder to retain date, time ( 19) and othercamcorder settings while the power source is disconnected. Connect a power source tothe camcorder when replacing the backup battery to retain the settings.1. Press the OPEN button to open theLCD panel.2. Pull out the battery holder.3. Place the lithium battery with the+ side facing downward into thebattery holder.4. Insert the battery holder.5. Close the LCD panel.WARNING!• The battery used in this device may present a fire or chemical burn hazard ifmistreated. Do not recharge, disassemble, heat above 100 °C or incinerate thebattery.• Replace the battery with a CR1616 made by Panasonic, Hitachi Maxell, Sony,Toshiba, Varta or Renata. Use of other batteries may present a risk of fire orexplosion.• The used battery should be returned to the supplier for safe disposal.❍ Do not pick up the battery using tweezers or other metal tools as this willcause a short circuit.❍ Wipe the battery with a clean dry cloth to ensure proper contact.❍ Keep the battery out of reach of children. If it is swallowed, seek medicalassistance immediately. The battery case may break and the battery fluids maydamage stomach and intestines.❍ Do not disassemble, heat or immerse the battery in water to avoid the risk ofexplosion.The backup battery has a life span of about a year. j flashes in red to informyou that it needs to be replaced.w e rqt
