146EUsing a Memory CardMV5i MCUtilizing Memory Card Still Images/Movies on a PCYou can download still images/movies from a memory card to a PC connected viathe USB interface. By using the provided software, you can organize and storestill images/movies and print out still images with added titles or frames.Use the USB cable and the Canon Digital Video Solution Disk/ArcSoft CameraSuite CD with the camcorder.• For details on how to connect the camcorder to a PC and install and operate thesoftware, refer to the Canon Digital Video Solution Disk instruction manual.• Refer also to your PC manual.• Power the camcorder from a household power source while connecting it to the PC.1. Install the software.2. Connect the camcorder and the PC with an USB cable.3. Turn the camcorder’s POWER switch to PLAY (VCR) and movethe TAPE/CARD switch to CARD.• “PC CONNECT [USB]” appears in the display to indicate that USBconnection is being performed.4. Start the software and download still images/movies from thememory card to the computer.Cautions:• Do not disconnect the USB cable while data is being transferred (while thecamcorder’s card access indicator is flashing). Doing so may damage thememory card data.• The connection may not work properly depending on the specifications andsettings of the software and PC.• The image files on your memory card and the image files you have stored(downloaded) to the hard disk drive of your computer are your valuable,original data files. If you wish to use image files on your computer, be sure tomake copies of them first, and use the copied file, retaining the original.Note:• The buttons on the camcorder (except for the POWER switch and TAPE/CARDswitch) do not operate during USB connection.IFC-300PCU USB cable: Signal flow
