MVX250i E, MVX200i E, MVX200 ESERVICE MODE · ADJUSTMENT175-2 AF Section AdjustmentNote)(1) The sections 5-2-1 : CZ automatic adjustment and 5-2-2 : Cam correction (AUTO) must be executed consecutively. If they areperformed independently, the sufficient performance cannot be obtained.Also, when section 5-2-1 : CZ automatic adjustment is completed, execute section 5-2-2 : Cam correction (AUTO) must beexecuted immediately without elapse of time. If execute section 5-2-2 : Cam correction (AUTO) is executed after elapse of timeupon completion of section 5-2-1 : CZ automatic adjustment, the sufficient performance cannot be obtained.Preparation)(1) For CZ automatic adjustment/cam correction, set the product condition.(2) Adjustment condition (initial condition)Tape/Card : TapeProgram AE : Auto ModeZOOM : Telephoto-endCZ adjustment chart : 2.4 ± 0.02 m from lens frontChart luminance : 500 lux or more (High illuminance should be avoided at the wide-angle end.)
