Canon MX520 series Fax Manual

Also see for MX520 series: Setup guide Online manual Online manual Online manual Online manual

Contents

6. Hang up the handset to finish using the service.Using the Rotary Pulse Line• Dialing by Using the Hook ButtonNoteYou can use the Hook button only when Hook key setting in Security control under FAXsettings is set to Enable.Security control1. Make sure that the machine is turned on.Confirming that the Power Is On2. Press the FAX button.The Fax standby screen is displayed.3. Press the Hook button.4. Use the Numeric buttons to dial the number of the information service.5. When the recorded message for the information service answers, press the Tone button to switchto tone dialing.6. Use the Numeric buttons to press the numbers in accordance with the message.7. Press the Hook button to finish using the service.• Dialing by Using the Telephone Connected to the Machine1. Make sure that the machine is turned on.Confirming that the Power Is On2. Press the FAX button.The Fax standby screen is displayed.3. Lift the handset of the telephone.4. Use the telephone to dial the number of the information service.5. When the recorded message for the information service answers, use the telephone to switch totone dialing.When you dial the number of the information service using the telephone connected to themachine, you cannot use the machine to switch to tone dialing. For instructions on how to switchto tone dialing, refer to your telephone's instruction manual.6. Use the telephone to press the numbers in accordance with the message.7. Hang up the handset to finish using the service.