LAN settings• Change wireless/wiredActivates either wireless LAN or wired LAN. You can also deactivate wireless/wired LAN.• Wireless LAN setupSelects the setup method for wireless LAN connection.NoteYou can also enter this setting menu by selecting WLAN setup from the menu screen.When this menu is selected, the machine starts searching for a WPS-compatible access point. If themachine detects the access point, follow the on-screen instructions to set up wireless LAN. If anaccess point is not detected or if you select another setup method, select one of the setup methodsbelow.• Standard setupSelect when you perform settings for wireless LAN manually using the operation panel of themachine.• WPSSelect when you perform settings for wireless LAN using Wi-Fi Protected Setup (WPS). SelectPush button method or PIN code method according to the method your access point supports,then follow the on-screen instructions.• Other setupSelect Advanced setup, then follow the on-screen instructions.• Confirm LAN settingsThe list of wireless/wired LAN settings of this machine is displayed on the LCD.You can print the list from this setting menu.• WLAN setting listThe list of wireless LAN settings of this machine is displayed on the LCD.The following setting items are displayed.Items SettingConnection Active/InactiveSSID XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCommunication mode InfrastructureChannel XXWireless LAN security Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)IPv4 address XXX. XXX. XXX. XXXIPv4 subnet mask XXX. XXX. XXX. XXXIPv4 default gateway XXX. XXX. XXX. XXXIPv6 address XXXX: XXXX: XXXX: XXXX:XXXX: XXXX: XXXX: XXXXIPv6 subnet prefix length XXXIPv6 default gateway XXXX: XXXX: XXXX: XXXX:XXXX: XXXX: XXXX: XXXXMAC address XX:XX:XX:XX:XX:XXIPsec settings Enable (ESP)/Enable (ESP & AH)/Enable (AH)/InactivePre-shared key XXXXXXXXXXXXXXXXPrinter name XXXXXXXXXXXXXXXBonjour service name XXXXXXXXXXXXXXXXXXXXXXXXXX
