• Bonjour settingsSetting items for LAN using Bonjour for Mac OS.Enable/disable BonjourSelecting Enable allows you to use Bonjour to perform the network settings.Service nameSpecifies the Bonjour service name. You can use up to 48 characters for the name.NoteYou cannot use the same service name as that already used for other LAN connecteddevices.• LPR protocol settingActivates/deactivates the LPR setting.• PictBridge communicationSetting items for printing from a PictBridge compliant device.Enable/disable communicationSelecting Enable allows you to print from a PictBridge compliant device.Timeout settingSpecifies the timeout length.• Wireless LAN DRX settingSelecting Enable allows you to activate discontinuous reception when using wireless LAN. Itallows you to save electricity.NoteDepending on the access point you are using, discontinuous reception may not be activatedeven though Enable is selected.Discontinuous reception is activated only while the machine is on standby. (The LCD is inthe screen saver mode.)• Wired LAN DRX settingSelecting Enable allows you to activate discontinuous reception when the machine is connectedto a device compatible with wired LAN. It allows you to save electricity.• Reset LAN settingsInitializes the network settings on the machine.ImportantNote that initialization erases all connection settings with computers, and printing or scanningoperation may become impossible. To use the machine over network, perform setup with theSetup CD-ROM. Be careful when you initialize the network settings on the machine.NoteWhen you initialize the network settings using IJ Network Tool:Initializing the Network Settings of the Machine
