Canon MX720 series Online Manual

Also see for MX720 Series: Online manual Setup guide Online manual Online manual Setup

Contents

Forwarding Scanned Data to the Computer Using the OperationPanel of the MachineYou can forward the scanned data to the computer using the operation panel of the machine.Before forwarding scanned data to the computer, confirm the following:• MP Drivers are installed.If MP Drivers are not yet installed, insert the Setup CD-ROM into the computer's disc drive, then installMP Drivers.• The machine is connected to a computer correctly.Make sure that the machine is connected to the computer correctly.Do not plug in or unplug the USB cable or LAN cable while the machine is in operation, or when thecomputer is in the sleep or standby mode.If you perform scanning via a network connection, make sure that all the required settings have beenspecified.Network Scan Settings• The destination and the file name are specified in Canon IJ Scan Utility.You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings ofCanon IJ Scan Utility:Settings Dialog Box1. Make sure that the machine is turned on.Confirming that the Power Is On2. Press the SCAN button.If you forward the data to the USB-connected computer:The Scan standby screen is displayed.Go to step 3.NoteIf the screen for selecting to which you save the data is displayed, select PC and press the OKbutton, then select Local (USB) and press the OK button. The Scan standby screen is displayed.If you forward the data to the network-connected computer:The screen for selecting to which you save the data is displayed.