Canon MultiPASS F30 Reference Manual

Also see for MultiPASS F30: Quick start guide User manual Software user's guide Specification

Contents

3-7Specialty Print Media Guidelines• Be sure to read all instructions that come with your Canon specialty print media, as these provideimportant information on how to achieve the highest print quality.Follow these guidelines:• When feeding Transparencies, remove each sheet after it is delivered, being careful not to touch any surfaces.Do not allow film sheets to stack up in the output tray.• Let the printed sheets of film or paper dry completely before storing them.Drying time:- Canon High Gloss Photo Film HG-201, Canon Glossy Photo Paper GP-301, and Canon Glossy Photo CardsFM-101: 2 minutes- Canon Transparencies CF-102: 15 minutes• When your printed sheets of film have dried completely, cover the printed sides with a sheet of plain (notcoated) paper before storing. This is recommended even if you place the sheets in a clear file or plastic holder.• When loading Transparencies, insert one sheet of plain paper as the last sheet in the stack.• Do not leave film in the multi-purpose tray for long periods of time. Dust and dirt may accumulate on the filmresulting in spotty printing.• To avoid smudging caused by fingerprints, use a pair of thin cloth gloves while loading and handling film.• To avoid fading, do not expose printed film to prolonged sunlight.• Store all print media flat. Do not remove them from their protective packaging until you are ready to use them.• Store unused film at temperatures between 59° and 86°F (15° and 30°C). The relative humidity should bebetween 10% and 70%.NOTEUsing Canon Specialty Print MediaPaper Handling3