Canon MultiPASS F30 Reference Manual

Also see for MultiPASS F30: Quick start guide User manual Software user's guide Specification

Contents

7-2Menus in Copy Mode• Default settings are shown in bold type.SPECIAL COPY** This menu is available only in the Copy Mode.PRINTER SETTINGSNOTEName1.IMAGE REPEATVERTICALHORIZONTAL2.MIRROR IMAGE3.ENTIRE IMAGEDescriptionPrints multiple copies of an image on a singlesheet. (→ p. 4-5)Selects the number of vertical repetitions.Selects the number of horizontal repetitions.Prints a mirror image of the original. (→ p. 4-7)Prints the original image to fit the selected papersize. (→ p. 4-8)Setting—1/2/3/41/2/3/4——Name1.CLEANING1.NOZZLE CHECK2.HEAD CLEANING3.HEAD REFRESHING4.ROLLER CLEANING2.ALIGN PRINT HEADVERT LINE PATTRNCHANGE V VALUELAT LINE PATTERNCHANGE L VALUE3.BOTTOM MARGINDescriptionSelects a cleaning function.Prints the nozzle check pattern to see if the printhead nozzles are operating properly. (→ p. 5-8)Performs normal printhead cleaning. (→ p. 5-8)Performs deep printhead cleaning. (→ p. 5-8)Performs roller cleaning. (→ p. 5-3)Aligns the vertical and lateral print position ofthe printhead. (→ Quick Start Guide)Prints the vertical line pattern.Selects the pattern you want to use, for A to F.Prints the lateral line pattern.Selects the pattern you want to use, for G and H.Selects the length of the bottom margin for colorcopying and color reception.Setting——————A, B, C:-3 to +7 (0)D, E, F:-5 to +5 (0)—-3 to +3 (0)NORMAL (5 mm)LONG (27 mm)