Canon MultiPASS MP390 Service Manual

Also see for MP370: User guide Install guide User guide Software guide Specification

Contents

Chapter 55-7"PUT IN CARTRIDGE"Cause: The printhead is not set.Solution: Set the printhead."WASTED INK NEAR FULL"Cause: The waste ink tank (which holds the ink used for print head cleaning) is nearly full.Solution: If "CHECK PRINTER" message is displayed, refer to Cause and Solution of the error code ##343 andreplace the waste ink tank."WRONG CARTRIDGE"Cause: The printhead (BJ cartridge) is not installed correctly.Solution: Install the prithead (BJ cartridge).Cause: The printhead (BJ cartridge) is defective.Solution: Replace the printhead (BJ cartridge)."MEMORY FULL"Cause: The fax's memory is full because it has received too many documents.Solutions: (1) Print out any documents which are stored in memory. Then start the operation again.(2) If the memory contains any facsimiles you don't need, delete them.(3) You cannot receive a fax was scanned with fine graphic images.Cause: The fax's memory is full because you tried to send too many pages at once.Solution: Divide the document and send each part separately.Cause: The macine's memory is full because you tried to copy too many pages at once or a very detailed document.Solution: Divide the document and copy each part separately.Cause: Tried to print a large image data in the photo print mode.Solution: Print the image data from the computer."WAIT COOLING"Cause: During printing, the printhead may have become too hot.Solution: Allow the machine to cool down. The machine will resume printing when it has cooled down.Download Service Manual And Resetter Printer at http://printer1.blogspot.com