Canon MultiPASS MP390 Setup Sheet

Also see for MultiPASS MP390: Brochure & specs Software guide Service manual User guide Specifications

Contents

Set-Up SheetSet-Up SheetThank you for purchasing the Canon MultiPASS MP390. To prepare your machine foruse, please follow the instructions in this Set-Up Sheet before referring to any otherdocumentation.READ THIS SHEET FIRSTREAD THIS SHEET FIRSTDo not connect the USB cable until , "Connect the USBcable."IMPORTANTSetup procedures StartSetup flowSetup procedures EndThis side explains the setup procedure for use without connecting to a computer. These steps explain the setup procedure for use by connecting to a computer. You can use the copy, photo print, fax functions.You can use the print, PC fax, scan functions.Connectpower cordConnecttelephone lineInstall Utility SoftwareInstall print headInstall MP DriversInstall ink tanksConnect USB cableLoad print media Align print headUnpack and installthe machineUnpack and install the machine.1 Carefully remove all items from the box.NOTEWhen removing the machine from thebox, handle it with care and do not drop it.2 Remove the protective material.NOTEAfter removing the protective material, donot lift the machine by grasping the scanunit.Hold the bottom side.3 Place the machine on a flat surface.• Be sure to hold the machine by thesides. Do not place anything in frontof the machine.4 Remove all shipping tape from theexterior of the machine.• After removing the tape, remove theprotective sheet.Do not grasp thescan unit.HT3-2145-000-V.1.0Remove theprotective sheet.