Canon MultiPASS MP390 Setup Sheet

Also see for MultiPASS MP390: Brochure & specs Software guide Service manual User guide Specifications

Contents

Install the print head.Connect the power cord.1 Connect the power cord. q Connect one end of the power cord to therear of the machine.w Connect the other end to the AC outlet.If the message appears,go to procedure 4, "Install the print head."Lift the scan unit.Touch only the lock lever!Raise this securely. Remove the protectivecap and discard it.Do not touch!SnapSlowly lower the lock lever until you heara “snap” sound and it locks into place.Approx. 15 secondsIf the paper output tray does not open, pressthe Open button to open the paper output tray.12ClickNOTEIf you open the scan unit while the machine is turned ON, the paper output tray will open.q Open the inner cover.w The print head holder moves to the center.Install the print head here.5 Insert the print head. 6 Lower the lock lever.3 Raise the lock lever. 4 Prepare the print head.1 Lift the scan unit until it locks into place.If there is a protective sheet, remove theprotective sheet.2 Open the inner cover.